Owning a car gives you a lot of freedom, but it also comes with a fair amount of responsibility. You need to know the road rules, keep up with servicing, and get things repaired when they start playing up. One part that deserves more attention than it usually gets is the gearbox. It takes the power your engine makes and sends it to the wheels, so it plays a big part in how your car drives every day.
When the gearbox starts to show signs of wear, most drivers have the same first question – how much will a replacement cost? In this post, we will walk through the typical gearbox replacement cost for each type of transmission, how the make of your car changes the price, and the factors a workshop looks at before putting a quote together. The figures below are general guides only. Please note that every vehicle is different, so use them as a starting point for a conversation with a specialist rather than a fixed price.
What Affects the Cost of a Gearbox Replacement
Two cars can come into a local workshop with the same symptom and leave with very different bills. That usually comes down to a handful of factors:
- Type of transmission: Manuals have fewer parts and take less time to remove and refit. Automatics, CVTs and dual-clutch units carry more internal components, electronics and software.
- Make and model: Some vehicles have gearboxes that are tightly packaged and harder to reach, which adds labour hours. Luxury and performance models often use proprietary parts.
- New, reconditioned or second-hand unit: A brand-new unit from the manufacturer is usually the most expensive choice. A reconditioned unit or a used gearbox from a wrecker can bring the cost down, though the condition and warranty vary.
- Parts availability: Gearboxes for popular models are easier and quicker to source in Australia. Parts that need to be imported can take longer and cost more.
- Labour: Rates differ between workshops, and some jobs need specialist diagnostic equipment or software programming once the new unit is fitted.
Gearbox Replacement Cost by Transmission Type
Manual Gearbox Replacement Cost
A manual gearbox replacement in Australia generally costs between $1,500 and $3,500, including parts and labour. That puts the manual gearbox replacement cost well below the other transmission types, because the unit is mechanically simpler and quicker to remove.
Many manual jobs also involve a new clutch, so it makes sense to replace both at once rather than pay for the labour twice. That said, manual cars are becoming far less common in Australia. As fewer are sold, parts can become harder to find and fewer workshops specialise in them, which may push repair prices up over time.
If you are after manual gearbox repairs in Sydney, consider going to a workshop that still works on them every week.
Automatic Gearbox Replacement Cost
Replacing an automatic gearbox usually costs somewhere between $4,000 and $8,000, depending on the vehicle and the type of unit fitted.
The cost is higher because there is much more going on inside the unit. Torque converters, planetary gear sets, clutch packs and a valve body all have to work together, and most modern automatics also need software calibration once they are fitted. In many cases, the fault is limited to one part, so automatic transmission repairs or a rebuild can work out cheaper than a full replacement.
A proper diagnosis is what tells you which way to go, and it also gives you a much better idea of the final automatic transmission repair cost.
CVT Replacement Cost
A CVT replacement can cost anywhere from $4,000 to $12,000, and some popular models sit toward the higher end of that range.
CVTs use a steel belt and two pulleys instead of fixed gears. They are common in small cars, hybrids and compact SUVs from brands like Nissan, Subaru, Toyota and Mitsubishi. Because the internals are hard to service individually, a faulty CVT is often replaced as a complete assembly, which is why the price range is so wide.
Dual-Clutch (DCT and DSG) Replacement Cost
Dual-clutch gearbox replacements generally start at around $5,000 and can go past $9,000, especially on European models.
A dual-clutch transmission uses two clutches to pre-select gears for very quick shifts. DSG is the name the Volkswagen Group uses for its dual-clutch units, so you will see it in many Volkswagen and Audi models. Repairs often involve the mechatronic unit, which combines the hydraulics and the electronic control, and the car will usually need brand-specific software to set everything up afterwards.
How Your Car’s Make Affects the Price
The country your car comes from can make a noticeable difference to the final bill. Here is how the most common brands on Australian roads compare:
Japanese Cars
Replacements for Japanese models typically fall between $2,500 and $5,000, although heavy-duty 4WDs can cost more.
In most cases, a Japanese car will cost less to fit with a replacement gearbox than a comparable European model. Brands like Toyota, Honda and Mitsubishi sell in large numbers here, so new, reconditioned and used units are easier to find, and their layouts tend to be easier to work on. The main exception is the CVT. Some Nissan and Subaru CVTs can be costly to replace, so a Japanese badge alone does not guarantee a lower price.
European Cars
European vehicles from BMW, Volkswagen, Audi and Mercedes-Benz often use advanced automatics and dual-clutch units with tightly packed components. Parts may need to be imported, and many jobs need brand-specific diagnostic software and programming. As a result, gearbox replacements for European models often range from $5,000 to well over $10,000.
Holden
Holden stopped making cars in Australia in 2017, and General Motors announced in 2020 that it would retire the brand altogether.
As part of that announcement, GM committed to supplying servicing and spare parts for at least 10 years. Plenty of Commodores and other Holden models are still on the road, and most use conventional automatic or manual gearboxes. Used and reconditioned units are still fairly easy to find for popular models, but supply for some imported Holden models is getting thinner, which can affect both the price and how long the repair takes.
Repairing, Rebuilding or Replacing Your Gearbox

A gearbox problem doesn’t always mean a full replacement. Depending on the fault, a smaller repair or a rebuild may get your car back to driving properly for a lot less. Vehicle repair and maintenance is a large and growing industry in Australia, partly because more drivers are keeping their cars for longer. That makes it worth knowing which option fits your situation.
| Option | When It Usually Makes Sense | What It Involves | Indicative Cost (AUD) |
| Repair | The fault is limited to one part, such as a leaking seal, a faulty solenoid, low fluid or a sensor problem | The faulty part is fixed or replaced while the gearbox is left mostly as it is | $300 to $1,500 |
| Rebuild | Several internal parts are worn, but the gearbox casing and main components are still in good condition | The gearbox is taken out and stripped down. Worn parts like clutch packs, bearings and seals are replaced, and then the unit is refitted | $2,500 to $5,000 |
| Replace | There is major internal damage, a rebuild would cost close to the price of a replacement, or the parts are hard to find | The old gearbox comes out and a new, reconditioned or second-hand unit goes in | $1,500 to $12,000+, depending on transmission type |
The lower replacement figures usually apply to a used or reconditioned gearbox. A brand-new unit from the manufacturer can cost a lot more.
Get an Accurate Quote From a Transmission Specialist in Sydney
The only way to know your real gearbox replacement cost is to have the vehicle looked at properly. Gearbox Solutions has been working on transmissions for over 40 years, and its transmission specialists handle manuals, automatics, CVTs and dual-clutch units across Japanese, European and Australian makes. As automatic transmission specialists based in Moorebank, the team works with drivers from Liverpool and across South West Sydney, as well as mechanics who prefer to send gearbox work to a dedicated workshop.
Every quote starts with a diagnostic scan and test drive, so you know exactly what the problem is before deciding between gearbox repairs, a rebuild or a replacement. Request a quote or call us today to book your vehicle in.